eng rus
United States:
To start planning, just add any place or article to your first travel (use round button with plus)
Once you have more than one travel - here you will be able to switch between them

How to use Colloidal Silver

United States | General information | Popularity - 0/10
What Is A True Colloidal Silver?
True colloidal silver is an aqueous solution containing both silver particles and silver ions in suspension. It should not contain any protein or other additives. It should also have a high ratio of nano silver particles to silver ions. These are the properties of our colloidal silver products.
For a solution to be classified as a colloid, it has to contain particles. Most products in market are made up of silver ions only, while to our best knowledge, there are no colloidal solution with a 100% particle content. How to use Colloidal Silver
Colloidal Silver Particle Size and PPM
Parts Per Million (PPM) is an indicator of how much silver is in a colloidal silver solution, and is NOT an indicator of strength or particle size. It’s the particle size and particle surface area that are important.
With our proprietary manufacturing system, we are able to produce highly homogeneous, nanometer sized, silver particles, with an average size of 0.5 nanometer. This gives our colloidal nano silver a high particle surface area thus making it highly bioactive and bioavailable.
With most other colloidal silver production, including home generators, particle sizes increase with PPM so a higher PPM solution can have a much higher particle size due to a process called agglomeration. Large particle size will reduce the particle surface area, hence a reduction in bioactivity and bioavailability.
With our proprietary amperage, temperature and water circulation control technology, we are able to control and maintain the particle size even as the concentration of the solution increases, to 10,000ppm, in this case.
Is Colloidal Silver Safe?
Silver is found as a naturally occurring trace element. It has been used for thousands of years as a natural way to support good health. Silver is one of the minerals for which there is no known toxicity level as far as causing health failure or death. Silver is one of the few substances that has a reference dose not based on an adverse health effect. This action was obviously driven by the recognized low or non-toxicity associated with this mineral.
The Environmental Protection Agency (EPA) has noted that silver is not a skin or eye irritant. The EPA actually noted its usefulness to stop bacterial growth implicated in eye infections. The U.S. Government’s Center for Disease Control has also stated that there are no recorded allergic, toxic, nor carcinogenic reactions to colloidal silver in 1995.
True colloidal silver does not present any serious side effects, and there are also no known interaction with conventional medications. However, you are always advised to speak with your doctor or healthcare professional.
Nonetheless, you may come across many warnings about it causing an irreversible condition called argyria (when people turn blue). However, this is caused by misuse, not of true colloidal silver, but through other types of silver solutions containing high concentrations of silver compounds, and taken in very large doses over a very long period of time.
Allergic reactions to silver are very rare. If you have any concerns, do a patch test by applying a drop onto the skin. Redness could indicate an intolerance.
Caution – Please note that colloidal silver is only safe at the recommended ppm. The colloidal silver concentrate with a ppm of 10,000, CANNOT and MUST NOT be used directly. You must dilute it to a lower concentration (10ppm to 30ppm is recommended) before using. Please note that direct contact of this concentrate with the body, skin or eye will result in discoloration or damage due to oxidation. Although the discoloration is non-toxic and harmless and will fade after sometime, it should be prevented. Colloidal Silver No.1 HighPPM only recommends using colloidal silver solutions diluted to between 10ppm to 30ppm.
close editor×