eng rus
United States:
ACTIVE TRAVEL
To start planning, just add any place or article to your first travel (use round button with plus)
ALL TRAVELS
Once you have more than one travel - here you will be able to switch between them

High-Speed Data Bus Transmission For The Rugged Rackmount Workstation Enclosure

United States | General information | Popularity - 0/10
When designing the power distribution terminal, the communication interface design between the high-speed bus design modules uses a high-speed full-duplex data bus for communication. In order to ensure the reliability of communication, for the rugged rackmount workstation enclosure,differential signals are used for transmission when transmitting signals. In the data transmission process , The core control module is used as the main communication module, and the remaining modules are the communication slave modules in the rugged rackmount workstation enclosure. Storage Server Case for Computing
The bus interface contains two sets of differential signals and a set of status signals. The two sets of differential signals are the downlink data transmission signal and the uplink data transmission signal. The status signal is used to detect and detect the status of the bus when the data is sent from the module in the the rugged rackmount workstation enclosure. Preemption of the right to use the uplink data bus for the rugged rackmount workstation enclosure.
High-speed data bus hardware high-speed data bus adopts full-duplex working mode, that is, data transmission and reception are independent differential signal groups. In the the rugged rackmount workstation enclosure, the high-speed bus includes two sets of differential data buses and a set of differential control buses. For data transmission under the the rugged rackmount workstation enclosure, the control bus is used to detect the channel idle state and seize channel resources when the slave module sends data. Chassis Rugged Computer
The uplink data bus used by the slave module for data transmission uses a fast channel preemption mechanism with conflict detection for communication. When the slave module needs to send data, the channel status needs to be detected first for the the rugged rackmount workstation enclosure. If the channel is idle, the right to use the channel is quickly obtained. For data transmission, the right to use the channel is released after the data transmission,that is completed for the the rugged rackmount workstation enclosure.In order to ensure the efficiency of data transmission between modules, each module must limit the amount of data transmitted in a single time,to ensure that all data transmissions are completed within the time limit of the right to use for the rugged rackmount workstation enclosure.
close editor×