eng rus
London:
ACTIVE TRAVEL
To start planning, just add any place or article to your first travel (use round button with plus)
ALL TRAVELS
Once you have more than one travel - here you will be able to switch between them

Foundation Design

London - United Kingdom | General information | Popularity - 0/10
REASONS FOR SUBSIDENCE

·         Small foundations – before building regulations were introduced in 1964, there was no legal requirement as to what depth and width foundation strip should be. As such we find many houses having small or no foundations.
·         Soft soil – silt, soft clay, and sand are examples for weak ground that may cause subsidence.
·         Coal mining – cavities in the soil beneath the building may collapse at any time taking the building down. Checking for coal mining report at Coal mining authorities may help to establish the risk of past mining. Alternatively, maps are available at the British Geological Society for coal reserves.
·         Trees – vegetation near the house grow roots to under the foundations which extract water and minerals causing soil shrinkage. Depending on the tree species and soil type we can expect up to 40% of soil volume reduction. See more at NHBC regulations

DEEP CONCRETE UNDERPINNING

To fix the subsidence, the most common solution is to dig 1m x 1m holes in 3 meters intervals under the existing foundation and to pour new concrete into these openings. This way we create a new larger footing to prevent further sinkage of the building, but this method does not repair buckled and cracked walls, it only stops further subsidence. Foundation Design

MODERN UNDERPINNING

The second method is to insert mechanical lifts or expandable concrete filled balloons to lift the building up to the original positions. This method fixes the problem associated with masonry and it prevents any future subsidence. The second method of underpinning is not as popular in the UK but we work with contractors who can take such a project.

DEEP BASEMENT PROJECT

The second reason for underpinning is to create new space, to deepen existing building or to create an entirely new basement. It is an expensive project, but with land and house prices going up, many people decide to increase the basement depth to create an additional room or entire flat beneath the existing house. Structural engineer Leeds

Here at CES, working with a Leeds ground contractor, we developed a very original method that allows 1.5m long holes using sacrificial props. We provide detailed technical drawings as well as a project statement with graphical illustrations of the process. This method saves much time and money comparing to traditional underpinning using 1m x 1m holes.
close editor×